FDI Creative

Monday, 15 August 2022 21:03

Adjusting the Check Spring

Renae Haddadin goes over how to adjust your check spring and make adjustments to your tension to get the perfect stitch.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 21:01

Recognizing a Good Stitch

Renae Haddadin explains how to recognize a good stitch. She also shows us how to recognize if the top tension is too loose or too tight.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:59

Thread Break Sensor

Renae Haddadin goes over how to make sure your thread break sensor is set up properly with Lightning Stitch, and how the thread break sensor should read the checkspring movement.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:58

Loading the INNOVA Longarm Quilting Frame

Learn how to load a quilt onto the frame of your INNOVA Longarm Quilting Machine.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:57

Tension Assembly Tutorial

Learn how to change your check spring, or your tension assembly.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:56

How to set up & use the INNOVA Bobbin Winder

Learn how to setup and use your bobbin winder.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:54

Threading Your INNOVA | INNOVA M28 Thread Path

How to properly thread your machine with Matt from INNOVA using INNOVAtech quilting thread.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:52

Adjusting the Hopping Foot Height/Orientation

Renae Haddadin shows us how to adjust the hopping foot height and orientation of the hopping foot.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:51

Adjust Hopping Foot Height

Renae Haddadin teaches us how to adjust the hopping foot height on the Innova machine.

Published in Video Library

Tagged under

General INNOVA Use

Monday, 15 August 2022 20:49

Inserting the Needle

Renae gives you helpful tips on how to make sure your needle is inserted properly.

Published in Video Library

Tagged under

General INNOVA Use

Page 3 of 25

M28

New!

M28

Bundled with AutoPilot Mach3

28” Throat

M28 Color

Red anodized aluminum side panels

From $52,999

M24

24” Throat

M24 Color

Blue aluminum side panels

From $28,999

M20

20” Throat

M20 Color

Purple aluminum side panels

From $22,999

m series specs

Learn More

Building on the INNOVA Classic’s strengths, the M Series INNOVA quilting machines were designed with the latest in technology, combining both beauty and refined engineering.

The INNOVA boasts having the fastest motor, lowest maintenance, most reliable stitch quality, and best customer service available today in the longarm quilting community.

The only maintenance that your INNOVA will require is general cleaning of thread lint buildup and regular lubricating of the hook race in the bobbin area of your machine!

With class leading stitch quality, no down-time, and extreme versatility, the INNOVA is sure to please.

10-year Warranty

24-hour Service

Made in the USA

Included with INNOVA Systems:

Style "M" large capacity hook for fewer bobbin changes
Set of leaders
Bobbin winder
Acrylic ruler base with latches
Bobbin storage tube with 4 bobbins
Size 16 needles (4 pack)
Dust cover
Set of hex keys
Needle threader
Tweezers
Sample thread
Oil bottle
Integrated needle laser light
Lightning Electronics Stitch Regulation
Cooling system for increased life
Platinum 10-Yr Warranty

Software Compatibility

The M Series has been constructed with a sleek design in mind—all wiring is now internal. It also features 64-Bit software, which has more power to execute a greater number of tasks, such as initiating a new pattern. This means that your software will run faster and bring less headaches. The updated M Software has bigger buttons, altered layouts, and a horizontal orientation for enhanced user interaction.

M Series software is simple to launch as most of the hardware is already built into the machine. For quick installation, simply plug in the provided hardware and activate the software with a personal serial number provided after purchase.

AutoPilot Mach3

Adding this digital system will increase your efficiency and productivity by automating patterns and allowing the machine to quilt for you! This software features our Perfect Corner Technology that will help you achieve precise 90° angles every time.

Learn More

Grand Format Embroidery
for AutoPilot Mach3

With the addition of this component, the INNOVA AutoPilot Mach 3 system becomes a hoop free embroidery system!

Learn More

PantoVision T2

This software is a digital pantograph system that enables you to create hand-guided patterns with ease!

Learn More

Stitch Regulation

INNOVA longarm quilting machines are shipped with our Lightning Stitch regulator. The stitch regulator regulates the machine speed based on operator movement to control the stitches per inch in and out of corners as well as in turns and tight radii. It is fully programmable through the PLC operator interface. The number of stitches per inch are adjustable from 2-22. When in regulated mode, the machine will automatically accelerate and decelerate based on the quilting operator's movements. Among the many functionalities included are cruise and basting mode.

Pro Frame

The commercial quality INNOVA Pro-Frame is designed to maximize efficiency and ease of use. The gas-assisted, top fabric roller lifting system provides easy access to straighten and inspect batting. Our unique fabric stationary quilt backing roller eliminates the need for raising and lowering as the quilt take up roller increases in diameter.

Pro-Frame Accessories:

Electric Channel Locks

These use electromagnets to stop and hold the machine in either the x-axis or y-axis, making it easier to stitch straight lines.

Locking Casters

These replace the machine leveler legs that come standard on the Pro-Frame, making it easy to move your INNOVA system around and lock it into position.

Pro Frame Specs:

10’ or 12’ length (custom sizes available)
Perforated extruded aluminum tubing
Adjustable height up to 13”
Machine leveling legs
2" diameter stainless steel rollers
Gas assisted lifting top fabric roller
Adjustable two bar take-up roller system
Adjustable stationary quilt backing roller maintains a perfectly level quilt bed
EZ Lock roller system provides infinite adjustment of fabric tension
Super glide carriage system for effortless movement
Manual channel locks
Heavy-duty, laminated wood tabletop that doubles as a cutting table
Includes leaders and 2 side clamps

Rotating Sew Head

The patented swivel sew head is exclusive to the INNOVA. This unique feature is included with all INNOVA quilting machines and makes adding innovative accessories, changing feet, removing broken needles, and completing preventative maintenance a breeze.

Technical Specs

Motor

All INNOVA machines are equipped with a 3000 stitch per minute one horse motor. This allows for faster more efficient quilting and better stitch regulation. The strong motor is capable of piercing multiple layer seam allowances without stalling. Coupled with the patented hopping foot, it easily accommodates the bulk found in the most difficult areas of your quilt. M Series motors have also been relocated to be in line with the lower drive shaft, stabilizing the center of gravity and improving machine smoothness.

Driveshaft

INNOVA has the largest driveshafts of any longarm quilting machine on the market today. They are supported by sealed ball bearings which eliminate the need for oiling or greasing the upper end of the machine, ensuring that your quilts stay clean.

Optional Equipment

Electric Lift System

With the push of a button quickly raise and lower your complete INNOVA system up to 11” in height.
Power Advance

Easily wind and unwind the take up roller by adding this industrial gear drive motor with driver.
Light Bar

Light up and enhance your quilting experience with the INNOVA Light Bar.
Crosshatch Ruler System

INNOVA’s exclusive built-in Crosshatch Ruler can be added to the Pro-Frame for multiple angle crosshatching.
Side Spool Holder

Feel confident running many specialty threads, such as metallics, silks, cottons, and MonoPolies.
Crank Handles

Add the precision engineered INNOVA Crank Handles to aid in rolling your fabric.
Thread Break Sensor

This sensor monitors your work and notifies you if your thread breaks.
Ruler Base

Removeable acrylic table that latches into position on the sew head base, providing support for your ruler work.
Magnifying Lens

When performing micro stippling (or for those of us that just can’t see well) the INNOVA magnifying glass is a welcome attachment.
Specialty Feet

Customize your system with the type of hopping foot that best suits your use.

Learn More

Building on the INNOVA Classic’s strengths, the M Series INNOVA quilting machines were designed with the latest in technology, combining both beauty and refined engineering.

The INNOVA boasts having the fastest motor, lowest maintenance, most reliable stitch quality, and best customer service available today in the longarm quilting community.

The only maintenance that your INNOVA will require is general cleaning of thread lint buildup and regular lubricating of the hook race in the bobbin area of your machine!

With class leading stitch quality, no down-time, and extreme versatility, the INNOVA is sure to please.

10-year Warranty

24-hour Service

Made in the USA

Included with INNOVA Systems:

Style "M" large capacity hook for fewer bobbin changes
Set of leaders
Bobbin winder
Acrylic ruler base with latches
Bobbin storage tube with 4 bobbins
Size 16 needles (4 pack)
Dust cover
Set of hex keys
Needle threader
Tweezers
Sample thread
Oil bottle
Integrated needle laser light
Lightning Electronics Stitch Regulation
Cooling system for increased life
Platinum 10-Yr Warranty

Software Compatibility

AutoPilot Mach3

Learn More

Grand Format Embroidery
for AutoPilot Mach3

With the addition of this component, the INNOVA AutoPilot Mach 3 system becomes a hoop free embroidery system!

Learn More

PantoVision T2

This software is a digital pantograph system that enables you to create hand-guided patterns with ease!

Learn More

Stitch Regulation

Pro Frame

Pro-Frame Accessories:

Electric Channel Locks

These use electromagnets to stop and hold the machine in either the x-axis or y-axis, making it easier to stitch straight lines.

Locking Casters

These replace the machine leveler legs that come standard on the Pro-Frame, making it easy to move your INNOVA system around and lock it into position.

Pro Frame Specs:

10’ or 12’ length (custom sizes available)
Perforated extruded aluminum tubing
Adjustable height up to 13”
Machine leveling legs
2" diameter stainless steel rollers
Gas assisted lifting top fabric roller
Adjustable two bar take-up roller system
Adjustable stationary quilt backing roller maintains a perfectly level quilt bed
EZ Lock roller system provides infinite adjustment of fabric tension
Super glide carriage system for effortless movement
Manual channel locks
Heavy-duty, laminated wood tabletop that doubles as a cutting table
Includes leaders and 2 side clamps

Technical Specs

Motor

Driveshaft

Optional Equipment

Electric Lift System

With the push of a button quickly raise and lower your complete INNOVA system up to 11” in height.
Power Advance

Easily wind and unwind the take up roller by adding this industrial gear drive motor with driver.
Light Bar

Light up and enhance your quilting experience with the INNOVA Light Bar.
Crosshatch Ruler System

INNOVA’s exclusive built-in Crosshatch Ruler can be added to the Pro-Frame for multiple angle crosshatching.
Side Spool Holder

Feel confident running many specialty threads, such as metallics, silks, cottons, and MonoPolies.
Crank Handles

Add the precision engineered INNOVA Crank Handles to aid in rolling your fabric.
Thread Break Sensor

This sensor monitors your work and notifies you if your thread breaks.
Ruler Base

Removeable acrylic table that latches into position on the sew head base, providing support for your ruler work.
Magnifying Lens

When performing micro stippling (or for those of us that just can’t see well) the INNOVA magnifying glass is a welcome attachment.
Specialty Feet

Customize your system with the type of hopping foot that best suits your use.

Machines

Build Your INNOVA

Build Your Dream M28

Build Your Dream M24

Build Your Dream M20

Edit Here!

INNOVA Dealers

INNOVA has made a commitment to its customers by guaranteeing that every customer receives a customized, hands-on training experience. Your local dealer is your primary contact for any of your training and support needs.

Locate

Slide

INNOVA M24 3D Tour

Learn about our machine and visualize it within your very own space!

Testimonials

Customer Feedback

“He truly exemplifies an “old school” work ethic, and it is greatly appreciated.”

Julie Lucht